Home    About Us   Contact Us     
View Cart
Safes l Programmable Features l  Additional Features  l Installation Options

Programmable Features

Guaranteed For: 7 YEARS!!
DT Series DCT Series
Operated by Digital Keypad only Operated by Digital Keypad and Magnetic Card swipe reader
Every Challenger safe can be programmed to suit the needs of your property and guests. The programmable features on the Challenger safe are all provided at no additional charge to you:

1. Personal Identification Number (PIN) Code: Program a 3,4,5 or 6 digit PIN code in your safes.

2. PIN code Display: See the PIN code on the LED screen as it is entered on the keypad or choose to deactivate the display of the PIN code as it is entered.

3. Hold Function: This function controls the amount of time a safe will remain idle after 4 wrong attempts at the PIN code have been made or 4 invalid cards have been swiped through the card reader. This can be programmed for; no time delay, 15 or 30 minutes.

4. Date and Time: This is critical in regards to an accurate and dependable audit trail on the safe.

5. Electronic Delay Before Opening. This feature can be programmed for 0 to 24 minutes of delay after the proper PIN code has been entered or magnetic strip card has been swiped.

6. PIN Code Confirmation: The PIN code that is entered to lock the safe will appear on the LED display for 3 seconds after the safe door is locked. It is recommended that this feature be used so the guest can see and confirm the exact PIN code they locked the safe with. This feature can also be deactivated so that the PIN code is not displayed after the safe is locked.

7. Programmable options for Opening and Closing the safe:

Master PIN code OR Master CREDIT CARD to close and open safes door. This feature is not recommended for the guestroom. It may be used for office or home use for convenience. This feature is NOT a master override code to open any safe on the property.

In order to lock the door, the user enters their PIN code then presses Lock (#) OR slides the credit card instead. A new PIN code can be entered OR a new Credit Card can be swiped each time the door is opened (most suitable for guestroom use.)

In order to lock the door, the user enters their PIN code then presses the LOCK (#) button twice then slides the master credit card. Both systems combined ensure maximum security. A new combination code/card cannot be entered unless the activator switch is reset. (most suitable for private use)

8. View Last 12 Openings: Ability to view the last 12 openings on the LED display of the safe




  Carts / Trucks
  Crowd Control
  Custom Fabrication
  Folding Luggage Racks
  Gaming Carts & Cabinets
  Housekeeping Carts
  Laundry Carts & Acces.
  Mop & Broom Holders
  Restroom Furnishings
  Trash/Ash Receptacles
  Waste Receptacles
Copyright 2001 Westlund Freeman LLC. All rights reserved